Mold Removal in Hammond, LA

Hammond has two housing stocks, and they fail differently

Drive from the older streets around downtown out toward the interstate and you cross about a century of construction in ten minutes. That matters more than it sounds, because the two halves of Hammond develop mold for opposite reasons, and the fix is not the same.

The older houses leak air. Raised floors, original framing, additions built onto additions, and a roofline that has been patched by several different people over the years. Air moves through them, which hides a marginal air conditioner — but it also means water finds paths that are not on any drawing. In these houses the mold usually turns up somewhere nobody was looking: the back of a closet on an exterior wall, under a floor near an old plumbing run, behind a bookcase against the north side.

The newer subdivisions do the reverse. They are sealed tight, so nothing leaves except through the mechanical system. When the air conditioner is slightly oversized it satisfies the thermostat quickly, shuts off, and never runs long enough to actually dry the air. The house is cool and still damp. Nothing leaks, nothing stains, and the first sign is a smell in a room that stays shut.

So the first thing we do in Hammond is work out which kind of house we are standing in, because that decides where to look before anything is opened up.

What it runs in Hammond

The floor is $600 for a small contained area. Most Hammond jobs settle between $1,000 and $5,000, and what moves a job up that range is almost never the size of the stain — it is how much material has to be cut out to get behind it, and whether the air handler has been moving it around the house.

You get the figure in writing before work starts, and the visit that produces the figure is free.

Estimate your job →

Two calculators, published price ranges, and no email address required to see the answer.

What is actually putting water in the house

Tangipahoa Parish is humid most of the year and shaded through a lot of it, so houses here dry slowly even when nothing is wrong. Against that background it usually takes only one more thing: an air conditioner cooling without dehumidifying, an attic that has stopped venting, a slow leak somebody put a towel under, or a house closed up while nobody was in it.

It can be one thing. More often it is several adding up, which is why the evaluation looks past the spot you called about. What we actually find causing it →

Property you own but do not live in

Hammond has a lot of property that somebody owns and somebody else occupies. If that is you, the useful thing is not an estimate over the phone — it is a written scope and a number you can act on, because you are the one who has to approve the work.

We work with the owner or the manager acting for them. Remediation means opening walls and taking material out, so the work has to be authorized by the property owner.

How the work goes

We come out free and tell you honestly whether you have a problem. If you do, the water source gets traced first, then you get a written scope and a number, and nothing starts until you say so.

The full process, step by step →

Testing versus removal

Louisiana licenses mold assessment and mold remediation separately, and one company is not permitted to hold both roles on the same property. We do the removal. If you want air sampling or lab identification first, we will point you to an independent assessor — and that result is worth more coming from somebody who is not going to be paid to fix what they find.

What Louisiana law actually requires →

Common questions

How much does mold removal cost in Hammond?

Our minimum is $600. Small jobs generally run $1,000 to $2,500, medium jobs $2,500 to $5,000, and larger jobs start at $5,000. Most mold remediation in Louisiana falls between $1,000 and $5,000, and the evaluation that produces your number is free.

Do you actually cover Hammond, or is it an afterthought?

We cover it. Hammond sits between Baton Rouge and the Northshore, both of which we work constantly, so it is not an outlying stop for us. Ask when you call and we will tell you honestly what the scheduling looks like that week.

My house is old. Does that make mold harder to deal with?

Harder to find, not harder to remove. Older Hammond houses have been added to and rerouted over the years, so water can travel a long way inside a wall before it shows. That is a reason to trace the moisture properly rather than a reason the job costs more.

There is a smell but I cannot see anything. Is that still worth a call?

Yes, and it is a common way this starts. A musty smell with nothing visible usually means growth somewhere enclosed, or humidity that has been high enough for long enough. Both are cheaper to deal with before they become visible.

Do you charge for the evaluation?

No. Charging to show up is why people wait, and a mold problem that waits does not stay the same size.

Will you clean the spot, or find out why it is there?

Both, and in that order the second one matters more. Cleaning what you can see is the easy half. If the water that fed it is still arriving, the mold comes back and nothing that caused it changed.

Around Hammond

We work Tangipahoa Parish along with the Northshore — Covington, Abita Springs and Slidell — and west along I-12 to Denham Springs and Baton Rouge.

See the full service area →